How To Understand Your Sump
Pump
Do you have a sump pump? Do you not really understand it?
It's not an alien from outer space. We can help make it not so
mysterious.
Steps:
1. Find out a few things about that little mechanical marvel in
your basement. Locating your sump pump is easy: In the lowest
point in your basement there will be a hole in the floor,
called a sump hole, toward which any water that shows up in
your basement should flow.
2. Take comfort in the fact that sump pump maintenance is an
almost-never kind of task.
3. Know where your sump pump hooks to your wastewater drain
- it's a must, but it's easy. Just follow the white or black
PVC or plastic line (about 1 1/2 to 2 inches in diameter) from
the top of your sump pump to where that pipe hooks into a
larger white or black drain line.
4. Find the product label on your sump pump and get a little
information off of it, such as what kind of voltage it uses
(almost all use 110, but check anyway).
5. Find out the GPH, or gallons per hour, output on your
pump. You may also need to know the "head" on your pump - the
height to which the pump can push a stream of water. This will
be a problem only if you have a basement that's deeper than
normal.
6. Follow the electrical cord to where it plugs in. One
common problem with malfunctioning sump pumps is accidental
loss of power (translation: Kids unplug it to run their race
car track).
7. Test your sump pump by filling the sump hole with water.
The pump is equipped with an automatic switch that senses when
the water reaches a certain level and turns itself on - then it
should clear most of the water from the pit, shutting off once
the water drops below a certain level.
8. Feel the bottom of the pump and make sure there isn't a
lot of sludge or foreign material around the grate on the
bottom side of the pump (do this only when the pump is
unplugged). Clear any blockage you find.
Tips:
The floor should have been designed to slant ever so slightly
toward the sump hole. Things like walls or poor design can get
in the way, so you may have to help on occasion if the water
gets deep, but the sump pump will take it from there.
See "How to Troubleshoot a Sump Pump," under Related eHows,
if you actually encounter a problem.
Source: www.eHow.com
|